Skip Headers
Oracle® Database Administrator's Guide
10g Release 2 (10.2)

Part Number B14231-01
Go to Documentation Home
Home
Go to Book List
Book List
Go to Table of Contents
Contents
Go to Index
Index
Go to Master Index
Master Index
Go to Feedback page
Feedback

Go to previous page
Previous
Go to next page
Next
View PDF

21 Using DBMS_REPAIR to Repair Data Block Corruption

This chapter explains how to use the DBMS_REPAIR PL/SQL package to repair data block corruption in database schema objects. It contains the following topics:

Options for Repairing Data Block Corruption

Oracle Database provides different methods for detecting and correcting data block corruption. One method of correction is to drop and re-create an object after the corruption is detected. However, this is not always possible or desirable. If data block corruption is limited to a subset of rows, then another option is to rebuild the table by selecting all data except for the corrupt rows.

Another way to manage data block corruption is to use the DBMS_REPAIR package. You can use DBMS_REPAIR to detect and repair corrupt blocks in tables and indexes. You can continue to use objects while you attempt to rebuild or repair them.


Note:

Any corruption that involves the loss of data requires analysis and understanding of how that data fits into the overall database system. Depending on the nature of the repair, you might lose data, and logical inconsistencies can be introduced. You must determine whether the repair approach provided by this package is the appropriate tool for each specific corruption problem.

About the DBMS_REPAIR Package

This section describes the procedures contained in the DBMS_REPAIR package and notes some limitations and restrictions on their use.


See Also:

PL/SQL Packages and Types Reference for more information on the syntax, restrictions, and exceptions for the DBMS_REPAIR procedures

DBMS_REPAIR Procedures

The following table lists the procedures included in the DBMS_REPAIR package.

Procedure Name Description
ADMIN_TABLES Provides administrative functions (create, drop, purge) for repair or orphan key tables.

Note: These tables are always created in the SYS schema.

CHECK_OBJECT Detects and reports corruptions in a table or index
DUMP_ORPHAN_KEYS Reports on index entries that point to rows in corrupt data blocks
FIX_CORRUPT_BLOCKS Marks blocks as software corrupt that have been previously identified as corrupt by the CHECK_OBJECT procedure
REBUILD_FREELISTS Rebuilds the free lists of the object
SEGMENT_FIX_STATUS Provides the capability to fix the corrupted state of a bitmap entry when segment space management is AUTO
SKIP_CORRUPT_BLOCKS When used, ignores blocks marked corrupt during table and index scans. If not used, you get error ORA-1578 when encountering blocks marked corrupt.

These procedures are further described, with examples of their use, in "DBMS_REPAIR Examples".

Limitations and Restrictions

DBMS_REPAIR procedures have the following limitations:

  • Tables with LOB datatypes, nested tables, and varrays are supported, but the out of line columns are ignored. xx what are out-of-line columns?

  • Clusters are supported in the SKIP_CORRUPT_BLOCKS and REBUILD_FREELISTS procedures, but not in the CHECK_OBJECT procedure.

  • Index-organized tables and LOB indexes are not supported.

  • The DUMP_ORPHAN_KEYS procedure does not operate on bitmap indexes or function-based indexes.

  • The DUMP_ORPHAN_KEYS procedure processes keys that are no more than 3,950 bytes long.

Using the DBMS_REPAIR Package

The following approach is recommended when considering DBMS_REPAIR for addressing data block corruption:

Task 1: Detect and Report Corruptions

The first task is the detection and reporting of corruptions. Reporting not only indicates what is wrong with a block, but also identifies the associated repair directive. There are several ways to detect corruptions. Table 21-1 describes the different detection methodologies.

Table 21-1 Comparison of Corruption Detection Methods

Detection Method Description
DBMS_REPAIR PL/SQL package Performs block checking for a specified table, partition, or index. It populates a repair table with results.
DB_VERIFY utility Performs block checking on an offline database
ANALYZE TABLE SQL statement Used with the VALIDATE STRUCTURE option, the ANALYZE TABLE statement verifies the integrity of the structure of an index, table, or cluster; checks or verifies that tables and indexes are synchronized.
DB_BLOCK_CHECKING initialization parameter When DB_BLOCK_CHECKING=TRUE, corrupt blocks are identified before they are marked corrupt. Checks are performed when changes are made to a block.

DBMS_REPAIR: Using the CHECK_OBJECT and ADMIN_TABLES Procedures

The CHECK_OBJECT procedure checks and reports block corruptions for a specified object. Similar to the ANALYZE...VALIDATE STRUCTURE statement for indexes and tables, block checking is performed for index and data blocks.

Not only does CHECK_OBJECT report corruptions, but it also identifies any fixes that would occur if FIX_CORRUPT_BLOCKS is subsequently run on the object. This information is made available by populating a repair table, which must first be created by the ADMIN_TABLES procedure.

After you run the CHECK_OBJECT procedure, a simple query on the repair table shows the corruptions and repair directives for the object. With this information, you can assess how best to address the reported problems.

DB_VERIFY: Performing an Offline Database Check

Use DB_VERIFY as an offline diagnostic utility when you encounter data corruption.


See Also:

Oracle Database Utilities for more information about DB_VERIFY

ANALYZE: Reporting Corruption

The ANALYZE TABLE...VALIDATE STRUCTURE statement validates the structure of the analyzed object. If the database successfully validates the structure, then a message confirming its validation is returned. If the database encounters corruption in the structure of the object, then an error message is returned. In this case, drop and re-create the object.


See Also:

Oracle Database SQL Reference for more information about the ANALYZE statement

DB_BLOCK_CHECKING Initialization Parameter

You can enable database block checking by setting the DB_BLOCK_CHECKING initialization parameter to TRUE. This checks data and index blocks for internal consistency whenever they are modified. DB_BLOCK_CHECKING is a dynamic parameter, modifiable by the ALTER SYSTEM SET statement. Block checking is always enabled for the system tablespace.


See Also:

Oracle Database Reference for more information about the DB_BLOCK_CHECKING initialization parameter

Task 2: Evaluate the Costs and Benefits of Using DBMS_REPAIR

Before using DBMS_REPAIR you must weigh the benefits of its use in relation to the liabilities. You should also examine other options available for addressing corrupt objects. Begin by answering the following questions:

  • What is the extent of the corruption?

    To determine if there are corruptions and repair actions, execute the CHECK_OBJECT procedure and query the repair table.

  • What other options are available for addressing block corruptions? Consider the following:

    • If the data is available from another source, then drop, re-create, and repopulate the object.

    • Issue the CREATE TABLE...AS SELECT statement from the corrupt table to create a new one.

    • Ignore the corruption by excluding corrupt rows from SELECT statements.

    • Perform media recovery.

  • What logical corruptions or side effects are introduced when you use DBMS_REPAIR to make an object usable? Can these be addressed? What is the effort required to do so?

    It is possible that you do not have access to rows in blocks marked corrupt. However, a block can be marked corrupt even if there are rows that you can validly access.

    It is also possible that referential integrity constraints are broken when blocks are marked corrupt. If this occurs, then disable and reenable the constraint; any inconsistencies are reported. After fixing all problems, you should be able to reenable the constraint.

    Logical corruption can occur when there are triggers defined on the table. For example, if rows are reinserted, should insert triggers be fired or not? You can address these issues only if you understand triggers and their use in your installation.

    If indexes and tables are not synchronized, then execute the DUMP_ORPHAN_KEYS procedure to obtain information from the keys that might be useful in rebuilding corrupted data. Then issue the ALTER INDEX...REBUILD ONLINE statement to synchronize the table with its indexes.

  • If repair involves loss of data, can this data be retrieved?

    You can retrieve data from the index when a data block is marked corrupt. The DUMP_ORPHAN_KEYS procedure can help you retrieve this information.

Task 3: Make Objects Usable

DBMS_REPAIR makes the object usable by ignoring corruptions during table and index scans.

Corruption Repair: Using the FIX_CORRUPT_BLOCKS and SKIP_CORRUPT_BLOCKS Procedures

You can make a corrupt object usable by establishing an environment that skips corruptions that remain outside the scope of DBMS_REPAIR capabilities.

If corruptions involve a loss of data, such as a bad row in a data block, all such blocks are marked corrupt by the FIX_CORRUPT_BLOCKS procedure. Then you can run the SKIP_CORRUPT_BLOCKS procedure, which skips blocks that are marked as corrupt. When the SKIP_FLAG parameter in the procedure is set, table and index scans skip all blocks marked corrupt. This applies to both media and software corrupt blocks.

Implications when Skipping Corrupt Blocks

If an index and table are not synchronized, then a SET TRANSACTION READ ONLY transaction can be inconsistent in situations where one query probes only the index, and a subsequent query probes both the index and the table. If the table block is marked corrupt, then the two queries return different results, thereby breaking the rules of a read-only transaction. One way to approach this isnot to skip corruptions in a SET TRANSACTION READ ONLY transaction.

A similar issue occurs when selecting rows that are chained. A query of the same row may or may not access the corruption, producing different results.

Task 4: Repair Corruptions and Rebuild Lost Data

After making an object usable, perform the following repair activities.

Recover Data Using the DUMP_ORPHAN_KEYS Procedures

The DUMP_ORPHAN_KEYS procedure reports on index entries that point to rows in corrupt data blocks. All such index entries are inserted into an orphan key table that stores the key and rowid of the corruption.

After the index entry information has been retrieved, you can rebuild the index using the ALTER INDEX...REBUILD ONLINE statement.

Fix Segment Bitmaps Using the SEGMENT_FIX_STATUS Procedure

Use this procedure if free space in segments is being managed by using bitmaps (SEGMENT SPACE MANAGEMENT AUTO).

This procedure recalculates the state of a bitmap entry based on the current contents of the corresponding block. Alternatively, you can specify that a bitmap entry be set to a specific value. Usually the state is recalculated correctly and there is no need to force a setting.

DBMS_REPAIR Examples

This section includes the following topics:

Examples: Building a Repair Table or Orphan Key Table

The ADMIN_TABLE procedure is used to create, purge, or drop a repair table or an orphan key table.

A repair table provides information about the corruptions that were found by the CHECK_OBJECT procedure and how these will be addressed if the FIX_CORRUPT_BLOCKS procedure is run. Further, it is used to drive the execution of the FIX_CORRUPT_BLOCKS procedure.

An orphan key table is used when the DUMP_ORPHAN_KEYS procedure is executed and it discovers index entries that point to corrupt rows. The DUMP_ORPHAN_KEYS procedure populates the orphan key table by logging its activity and providing the index information in a usable manner.

Example: Creating a Repair Table

The following example creates a repair table for the users tablespace.

BEGIN
DBMS_REPAIR.ADMIN_TABLES (
     TABLE_NAME => 'REPAIR_TABLE',
     TABLE_TYPE => dbms_repair.repair_table,
     ACTION     => dbms_repair.create_action,
     TABLESPACE => 'USERS');
END;
/

For each repair or orphan key table, a view is also created that eliminates any rows that pertain to objects that no longer exist. The name of the view corresponds to the name of the repair or orphan key table and is prefixed by DBA_ (for exampl, DBA_REPAIR_TABLE or DBA_ORPHAN_KEY_TABLE).

The following query describes the repair table that was created for the users tablespace.

DESC REPAIR_TABLE

 Name                         Null?    Type
 ---------------------------- -------- --------------
 OBJECT_ID                    NOT NULL NUMBER
 TABLESPACE_ID                NOT NULL NUMBER
 RELATIVE_FILE_ID             NOT NULL NUMBER
 BLOCK_ID                     NOT NULL NUMBER
 CORRUPT_TYPE                 NOT NULL NUMBER
 SCHEMA_NAME                  NOT NULL VARCHAR2(30)
 OBJECT_NAME                  NOT NULL VARCHAR2(30)
 BASEOBJECT_NAME                       VARCHAR2(30)
 PARTITION_NAME                        VARCHAR2(30)
 CORRUPT_DESCRIPTION                   VARCHAR2(2000)
 REPAIR_DESCRIPTION                    VARCHAR2(200)
 MARKED_CORRUPT               NOT NULL VARCHAR2(10)
 CHECK_TIMESTAMP              NOT NULL DATE
 FIX_TIMESTAMP                         DATE
 REFORMAT_TIMESTAMP                    DATE

Example: Creating an Orphan Key Table

This example illustrates the creation of an orphan key table for the users tablespace.

BEGIN
DBMS_REPAIR.ADMIN_TABLES (
     TABLE_NAME => 'ORPHAN_KEY_TABLE',
     TABLE_TYPE => dbms_repair.orphan_table,
     ACTION     => dbms_repair.create_action,
     TABLESPACE => 'USERS');
END;
/

The orphan key table is described in the following query:

DESC ORPHAN_KEY_TABLE

 Name                         Null?    Type
 ---------------------------- -------- -----------------
 SCHEMA_NAME                  NOT NULL VARCHAR2(30)
 INDEX_NAME                   NOT NULL VARCHAR2(30)
 IPART_NAME                            VARCHAR2(30)
 INDEX_ID                     NOT NULL NUMBER
 TABLE_NAME                   NOT NULL VARCHAR2(30)
 PART_NAME                             VARCHAR2(30)
 TABLE_ID                     NOT NULL NUMBER
 KEYROWID                     NOT NULL ROWID
 KEY                          NOT NULL ROWID
 DUMP_TIMESTAMP               NOT NULL DATE

Example: Detecting Corruption

The CHECK_OBJECT procedure checks the specified object, and populates the repair table with information about corruptions and repair directives. You can optionally specify a range, partition name, or subpartition name when you want to check a portion of an object.

Validation consists of checking all blocks in the object that have not previously been marked corrupt. For each block, the transaction and data layer portions are checked for self consistency. During CHECK_OBJECT, if a block is encountered that has a corrupt buffer cache header, then that block is skipped.

The following is an example of executing the CHECK_OBJECT procedure for the scott.dept table.

SET SERVEROUTPUT ON
DECLARE num_corrupt INT;
BEGIN
num_corrupt := 0;
DBMS_REPAIR.CHECK_OBJECT (
     SCHEMA_NAME => 'SCOTT',
     OBJECT_NAME => 'DEPT',
     REPAIR_TABLE_NAME => 'REPAIR_TABLE',
     CORRUPT_COUNT =>  num_corrupt);
DBMS_OUTPUT.PUT_LINE('number corrupt: ' || TO_CHAR (num_corrupt));
END;
/

SQL*Plus outputs the following line, indicating one corruption:

number corrupt: 1

Querying the repair table produces information describing the corruption and suggesting a repair action.

SELECT OBJECT_NAME, BLOCK_ID, CORRUPT_TYPE, MARKED_CORRUPT,
       CORRUPT_DESCRIPTION, REPAIR_DESCRIPTION
     FROM REPAIR_TABLE;

OBJECT_NAME                      BLOCK_ID CORRUPT_TYPE MARKED_COR
------------------------------ ---------- ------------ ----------
CORRUPT_DESCRIPTION
------------------------------------------------------------------------------
REPAIR_DESCRIPTION
------------------------------------------------------------------------------
DEPT                                    3            1 FALSE
kdbchk: row locked by non-existent transaction
        table=0   slot=0
        lockid=32   ktbbhitc=1
mark block software corrupt

The corrupted block has not yet been marked corrupt, so this is the time to extract any meaningful data. After the block is marked corrupt, the entire block must be skipped.

Example: Fixing Corrupt Blocks

Use the FIX_CORRUPT_BLOCKS procedure to fix the corrupt blocks in specified objects based on information in the repair table that was generated by the CHECK_OBJECT procedure. Before changing a block, the block is checked to ensure that the block is still corrupt. Corrupt blocks are repaired by marking the block software corrupt. When a repair is performed, the associated row in the repair table is updated with a timestamp.

This example fixes the corrupt block in table scott.dept that was reported by the CHECK_OBJECT procedure.

SET SERVEROUTPUT ON
DECLARE num_fix INT;
BEGIN 
num_fix := 0;
DBMS_REPAIR.FIX_CORRUPT_BLOCKS (
     SCHEMA_NAME => 'SCOTT',
     OBJECT_NAME=> 'DEPT',
     OBJECT_TYPE => dbms_repair.table_object,
     REPAIR_TABLE_NAME => 'REPAIR_TABLE',
     FIX_COUNT=> num_fix);
DBMS_OUTPUT.PUT_LINE('num fix: ' || TO_CHAR(num_fix));
END;
/

SQL*Plus outputs the following line:

num fix: 1

The following query confirms that the repair was done.

SELECT OBJECT_NAME, BLOCK_ID, MARKED_CORRUPT
     FROM REPAIR_TABLE;

OBJECT_NAME                      BLOCK_ID MARKED_COR
------------------------------ ---------- ----------
DEPT                                    3 TRUE

Example: Finding Index Entries Pointing to Corrupt Data Blocks

The DUMP_ORPHAN_KEYS procedure reports on index entries that point to rows in corrupt data blocks. For each index entry, a row is inserted into the specified orphan key table. The orphan key table must have been previously created.

This information can be useful for rebuilding lost rows in the table and for diagnostic purposes.


Note:

This should be run for every index associated with a table identified in the repair table.

In this example, pk_dept is an index on the scott.dept table. It is scanned to determine if there are any index entries pointing to rows in the corrupt data block.

SET SERVEROUTPUT ON
DECLARE num_orphans INT;
BEGIN
num_orphans := 0;
DBMS_REPAIR.DUMP_ORPHAN_KEYS (
     SCHEMA_NAME => 'SCOTT',
     OBJECT_NAME => 'PK_DEPT',
     OBJECT_TYPE => dbms_repair.index_object,
     REPAIR_TABLE_NAME => 'REPAIR_TABLE',
     ORPHAN_TABLE_NAME=> 'ORPHAN_KEY_TABLE',
     KEY_COUNT => num_orphans);
DBMS_OUTPUT.PUT_LINE('orphan key count: ' || TO_CHAR(num_orphans));
END;
/

The following output indicates that there are three orphan keys:

orphan key count: 3

Index entries in the orphan key table implies that the index should be rebuilt. This guarantees that a table probe and an index probe return the same result set.

Example: Skipping Corrupt Blocks

The SKIP_CORRUPT_BLOCKS procedure enables or disables the skipping of corrupt blocks during index and table scans of the specified object. When the object is a table, skipping applies to the table and its indexes. When the object is a cluster, it applies to all of the tables in the cluster, and their respective indexes.

The following example enables the skipping of software corrupt blocks for the scott.dept table:

BEGIN
DBMS_REPAIR.SKIP_CORRUPT_BLOCKS (
     SCHEMA_NAME => 'SCOTT',
     OBJECT_NAME => 'DEPT',
     OBJECT_TYPE => dbms_repair.table_object,
     FLAGS => dbms_repair.skip_flag);
END;
/

Querying scott's tables using the DBA_TABLES view shows that SKIP_CORRUPT is enabled for table scott.dept.

SELECT OWNER, TABLE_NAME, SKIP_CORRUPT FROM DBA_TABLES
    WHERE OWNER = 'SCOTT';

OWNER                          TABLE_NAME                     SKIP_COR
------------------------------ ------------------------------ --------
SCOTT                          ACCOUNT                        DISABLED
SCOTT                          BONUS                          DISABLED
SCOTT                          DEPT                           ENABLED
SCOTT                          DOCINDEX                       DISABLED
SCOTT                          EMP                            DISABLED
SCOTT                          RECEIPT                        DISABLED
SCOTT                          SALGRADE                       DISABLED
SCOTT                          SCOTT_EMP                      DISABLED
SCOTT                          SYS_IOT_OVER_12255             DISABLED
SCOTT                          WORK_AREA                      DISABLED

10 rows selected.